Journal of Materials and Engineering Structures
Volume 9, Numéro 4, Pages 531-537
2022-12-30

Investigation Of Ultrasonic Pulse Velocity Reduction In Reinforced Concrete Members Exposed To High Temperature

Authors : Vinh An Le . Thao Nguyen Thi-thanh . Nguyen Ngoc Tan .

Abstract

Nowadays, the fire resistance of reinforced concrete members is generally defined by material characteristics at elevated temperatures and temperature functions. However, the influence of steel reinforcement in concrete members exposed to high temperatures on the ultrasonic pulse velocity (UPV) measurements has still been limited. In this paper, the quality of concrete and steel reinforcement/concrete interface was assessed under high temperatures using UPV measurements. The specimens were classified into four categories: the control tested cubes without rebar; tested cubes with plain and ribbed steel rebars. Tested cubes with dimensions of 100x100x100 mm were cast and cured for 28 days at room temperature (20oC). After drying all specimens at 105oC for 48 hours, these cubes were subjected to four different temperature levels ranging from 150oC to 400oC for 4 hours before being cooled to room temperature. According to the measured values of UPV, the higher the temperature attained in specimens, the greater the following changes occurred in concrete: (i) the degradation within the concrete; (ii) the debonding of steel reinforcements in concrete.

Keywords

Reinforced concrete ; High temperature ; Ultrasonic pulse velocity ; Thermal degradation

Seismic Retrofitting: Reinforced Concrete Shear Wall Versus Cfrp Reinforced Concrete Using Pushover Analysis

Riyad Y. .  Kissi B. .  Mrani I. .  Parron M.a. .  Dolores R.c.m. . 
pages 181-195.


Numerical Simulation And Reliability Of Behaviour Until The Rupture Of Reinforced Concrete Spacial Structure Members With Circular Cross Section

Bouchafa Djamal .  Said Kachi Mohand .  Bouafia Youcef .  Benyahi Karim .  Barboura Salma . 
pages 61-82.