Effects of steel corrosion to BFRP Strengthened columns under eccentric loading

Xuan Tin, Huynh; Trung Truc, Nguyen; Tri Quang, Tran; Thanh Thuy, Ngo

Journal of Materials and Engineering Structures
Volume 7, Numéro 4, Pages 669-675
2020-12-30

Effects Of Steel Corrosion To Bfrp Strengthened Columns Under Eccentric Loading

Authors : Xuan Tin Huynh . Trung Truc Nguyen . Tri Quang Tran . Thanh Thuy Ngo .

Abstract

The experiment consists of twenty-four mid-scale rectangular RC columns (200x200x800mm) strengthening by BFRP sheets and research variables include: BFRP layer (0, 1, and 3 layers); eccentricity (25mm and 75mm); and 4 levels of steel corrosion. The results reveal that SEL (ratio of ultimate load of strengthened member to that of corresponding controlled member) is direct proportion with steel corrosion while SEV (ratio of ultimate vertical displacement of strengthened member to that of corresponding controlled member) is inverse proportion with steel corrosion; SEL slightly increases with the increase of BFRP layer and eccentricity; but SEV decreases noticeably with the increase of BFRP layer and eccentricity. In addition,the interaction between FRP sheets, stirrups, and longitudinal reinforcement in steel degraded BFRP strengthened columns is very strong.However, column design basing on current design manuals and codes as ACI 440.2R and CNR DT 200R1 has not mentioned this affect. Thus, the load capacity prediction of column being strengthened by BFRP sheets should include levels of steel corrosion for reality, reasonable, and integral of the design.